NANUK 963
At 29 inches long and nearly 11 inches deep, the NANUK 963 can store a whole lot of your essentials. The NANUK 963 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make traveling much easier with your audio gear, video gear, photo gear, industrial equipment, outdoor gear and much more!
Specifications:
| Interior dimensions |
29.0″ x 18.0″ x 10.6″ 737 mm x 457 mm x 269 mm |
| Exterior dimensions |
32.5″ x 21.0″ x 12.3″ 826 mm x 533 mm x 312 mm |
| Weight | 22.50 lb | 10.2 kg |
| Lid depth | 2.1″ | 53 mm |
| Base depth | 8.5″ | 216 mm |
| Material | Lightweight NK-7 resin |
| Internal volume | 3.2 Cu. ft (90.6 L) |
| Max buoyancy | TBD |
| Temperature range | Min -20°F (-29°C ) | Max 140°F (60°C) |
| Padlock Holes Diameter | 0.340" |
| Height ground to top of the handle [ 2 possible heights ] |
36" | 41" |
| Water resistant (IP67) | Yes |
| Warranty | Conditional lifetime guarantee |
| Airline check-in | Yes |
| Airline cabin carry-on | No |
| *Check with your airline carrier before traveling | |
United StatesCase is great. Found some protrusions on the bottom of the case that did not allow me to go all the way down the foam so all of my equipment was not properly protected...although I do have quite a lot of equipment to be stored. The foam itself was not serated all of the way through from the factory and it made pulling the foam very difficult. The top, middle, and bottom layers do not fully match, so you will not have perfect cutouts all the way down. I would reccomend buying this case empty and getting some custom foam for it.
United StatesCase is great. Found some protrusions on the bottom of the case that did not allow me to go all the way down the foam so all of my equipment was not properly protected...although I do have quite a lot of equipment to be stored. The foam itself was not serated all of the way through from the factory and it made pulling the foam very difficult. The top, middle, and bottom layers do not fully match, so you will not have perfect cutouts all the way down. I would reccomend buying this case empty and getting some custom foam for it.